Concrete Repair Services › Concrete Pool Deck Repair
Concrete Pool Deck Repair in Wilmington, NC
Pool deck concrete takes a beating from water, UV, and constant wet-dry cycles. Cracks, lifting slabs, and rough spalled surfaces are the most common problems we see. Left alone, those issues become trip hazards and let water migrate under the slab where it causes more damage.
Wilmington Concrete Repair Pros provides concrete pool deck repair for homeowners across Wilmington, NC. Call for a free inspection and a written quote before any work begins.
When to Call
When You Need Concrete Pool Deck Repair
- Cracks along the pool coping have widened enough to catch a toe
- One section of the deck has lifted and created an uneven edge
- The surface has gone rough and is tearing up bare feet
- Water is pooling near the pool edge instead of draining away from it
- A control joint has opened up and is letting debris fill the gap
- Spalling has exposed the aggregate and the deck looks pitted and worn
How It Works
Our Process for Concrete Pool Deck Repair
- 1
Site Walk
We walk the full deck perimeter before quoting anything. We check drainage slope, crack patterns, and whether any slabs have voids underneath them.
- 2
Slab Sounding
We tap the surface to find hollow spots. A hollow slab means the base has washed out. That changes what the repair looks like and how long it holds.
- 3
Surface Prep
Loose material, old patching, and contamination come off first. We grind or pressure-wash depending on what the surface needs. Clean concrete is what makes repairs stick.
- 4
Crack and Joint Repair
Structural cracks get routed and filled with the right compound for a wet environment. Control joints get resealed so movement doesn't reopen the crack next season.
- 5
Surface Repair or Overlay
Spalled or rough areas get a polymer-modified repair mortar or thin overlay, matched as close as practical to the existing texture and finish.
- 6
Final Check and Cleanup
We check the repaired areas against the original slope, clean up the site, and walk you through what was done and what to watch for going forward.
What's included
- Full deck inspection and drainage slope assessment before work starts
- Surface grinding or pressure washing as part of standard prep
- Crack routing and filling on all identified cracks in the repair zone
- Control joint resealing where joints have opened or degraded
- Polymer-modified mortar repair on spalled or pitted surface areas
- Post-repair walkthrough explaining cure time and what to avoid
What's not included
- Replacing full slabs or sections where the concrete has failed structurally
- Decorative coatings, stamped overlays, or color matching to original finishes
- Any work on pool coping, tile, or the pool shell itself
Real Situations
Common Scenarios in Wilmington
A homeowner in Wilmington's Landfall area has a 15-year-old broom-finish deck with a long diagonal crack running from the skimmer area toward the fence.
We sound the slab on both sides of the crack to check for voids. If the base is solid, we route the crack and fill it with a flexible polyurethane compound rated for wet environments. We also reseal the nearby control joints since those are likely contributing to where the crack formed.
A family near Wrightsville Beach has a section of pool deck that has lifted about three-quarters of an inch, right where people step out of the pool.
We determine whether the lift is from tree roots, soil settlement, or washout beneath the slab. If the slab is otherwise sound, we look at grinding the high edge to remove the trip hazard and stabilizing the void. Full slab replacement is a separate scope we'd call out clearly if that's what the situation requires.
A rental property owner near Masonboro has a pool deck with widespread surface spalling that's getting complaints from tenants about rough texture.
We assess how deep the spalling goes. Shallow surface spalling on a structurally sound slab is a good candidate for a thin polymer overlay. We prep the surface fully, apply the overlay, and finish it to a texture that matches the original broom finish as closely as practical.
Wilmington Context
Why this matters in Wilmington
Wilmington's heat, humidity, and afternoon thunderstorms put pool decks through cycles that accelerate concrete wear. The sandy coastal soils under many decks in areas like Monkey Junction and Carolina Beach shift and wash out more readily than inland clay. Older neighborhoods near Oleander Drive and South College Road often have pool decks from the 1990s that have never been resealed and are showing their age.
Straight Talk
About pricing & scope
Pool deck repairs vary in cost based on how much surface area is affected, whether voids exist under the slab, and how much prep the surface needs. An estimate on the phone is rarely accurate. What looks like a simple crack sometimes reveals a washed-out base once we start. We tell you what we find before we proceed.
What This Fixes
Problems We See in Wilmington
More Concrete Repair Services
Concrete Pool Deck Repair Near You