Concrete Repair Services › Concrete Resurfacing Service
Concrete Resurfacing Service in Wilmington, NC
Resurfacing puts a new concrete-based layer over an existing slab that's worn out on top but still solid underneath. It's not a coating or a paint — it bonds to the old concrete and becomes part of the slab surface. This works when the problem is surface deterioration, not cracking from movement or a failing base.
Wilmington Concrete Repair Pros provides concrete resurfacing service for homeowners across Wilmington, NC. Call for a free inspection and a written quote before any work begins.
When to Call
When You Need Concrete Resurfacing Service
- Your driveway looks rough and pitted but is still flat and solid underfoot
- A pool deck has surface flaking from years of sun and chlorine exposure
- Your garage floor has oil stains and pitting that cleaning won't fix anymore
- A back patio has a rough, chalky surface that's uncomfortable to walk on barefoot
- You want to change the texture of slippery smooth concrete near an entry
- A commercial parking pad has surface wear but no significant cracking or settling
How It Works
Our Process for Concrete Resurfacing Service
- 1
Slab Evaluation
We check for cracks, soft spots, delamination, and slab movement before anything else. Resurfacing over a bad base is wasted money. If the slab isn't structurally sound, we tell you that upfront.
- 2
Crack and Spall Pre-Repair
Any cracks or spalled areas get addressed before the overlay goes down. The resurfacer won't bridge voids or hide moving cracks — they'll telegraph through the new surface within a season.
- 3
Surface Preparation
We grind or shot-blast the existing surface to open the pores and remove anything that would prevent bonding — sealers, oils, laitance. This is the most important step and takes real time.
- 4
Primer Application
A bonding primer goes down first. In Wilmington's humidity, we pay close attention to conditions — a primer applied in high humidity or on a surface that's too hot won't cure right.
- 5
Overlay Application
The resurfacer gets mixed and applied at the right thickness for the application. Too thin and it won't last. We work in sections to maintain a wet edge and avoid lap marks.
- 6
Texture and Cure
Texture is applied before the material sets — broom, trowel, or stamp depending on what you need. Then it cures. Foot traffic and vehicle traffic have different wait times and we give you both.
What's included
- Full slab inspection before any material is ordered or applied
- Mechanical surface preparation to ensure proper bonding
- Pre-treatment of cracks and surface defects before overlay
- Primer and resurfacing material application with proper thickness control
- Texture finish appropriate to the surface use and your preference
- Instructions on cure time before returning to foot and vehicle traffic
What's not included
- Color pigmentation or decorative stamping beyond standard texture finishes
- Repair of underlying structural issues or settling that caused surface damage
- Sealer application — that's a separate step with its own scheduling requirements
Real Situations
Common Scenarios in Wilmington
A homeowner near Landfall has a five-year-old exposed aggregate driveway that's lost its surface stone and looks rough and uneven.
We assess whether the aggregate loss is surface-only or if there's underlying delamination. If the slab is solid, we prep the surface and apply a textured overlay that matches the original roughness. We're honest that it won't look like new exposed aggregate — it will look like a clean, fresh resurfaced slab.
A family in Monkey Junction wants their dated, rough garage floor resurfaced to make the space cleaner and easier to maintain.
We check for oil penetration and any soft areas from spills. Deep oil contamination can prevent bonding, and we test for it before committing to the job. If it's manageable, we grind, degrease, prime, and apply a trowel-finish overlay with a light texture to cut slip risk.
A homeowner with a back patio in Castle Hayne has surface scaling from a bad original pour that's gotten worse every winter.
We evaluate how deep the scaling goes. Surface scaling is a good candidate for resurfacing. If the damage goes deep or shows signs of base failure, we explain that resurfacing isn't the right fix. Assuming it's surface-level, we prep and apply an overlay with a broom finish to match the original look.
Wilmington Context
Why this matters in Wilmington
Wilmington's heat and humidity are hard on concrete surfaces. UV exposure bleaches and degrades surface paste faster than in cooler climates, and the moisture cycling from coastal humidity causes scaling in concrete that wasn't air-entrained properly — common in slabs poured before stricter specs. Neighborhoods with homes from the 1990s building boom often have driveways and patios that are structurally fine but surface-worn.
Straight Talk
About pricing & scope
Price is driven mainly by square footage and condition of the existing surface. Surfaces with heavy oil, old sealers, or significant pitting take longer to prep and that adds cost. Mid-job surprises usually come from hidden delamination that only shows up once we start grinding — we stop and talk to you before continuing.
What This Fixes
Problems We See in Wilmington
More Concrete Repair Services
Concrete Resurfacing Service Near You